Netting Zero for Less

This paper proposes an open standard (data transparency), that uses a post-occupancy method of
certifying buildings based on actual performance data obtained from physical building attributes and utility
bills. This analysis results in a certification label that compares against provincial and/or federal
benchmarks and federal climate change mitigation targets.

Future Heating

We were initially under the assumption that we had to make an all-or-nothing choice: basically a) go 100% electric to get to zero carbon, or b) replace a gas furnace with a new gas furnace and lock in to a carbon-emitting heating system for the next 20 years – the estimated life of the system. That’s a false choice…

woman in brown dress holding white plastic bottle painting

Architects, Air and SarsCov2

We are approaching nearly a year of life with COVID-19, yet the pandemic appears to be only worsening. By the time this gets published, worldwide deaths will have exceeded 2 million, yet few countries seem to have this under control. The purpose of this post is to appeal to Ontario Architects and Engineers to consider how architectural and engineering interventions can reduce the transmission of this virus

Architects as Energy Experts

Architects can and should use BEM or energy simulation tools for Design Optimization. Furthermore they can and should also be encouraged to use BEM for demonstrating Code Compliance. Lastly, Architects should also be encouraged to seek out professional certifications or designations such as LEED, Passive House and even EnerGuide or R2000 Evaluator designations in order to offer Certification Services, if they wish to expand their scope of practice.

ArchiCad, EcoDesigner and Passive House

The real promise of BIM/BEM (Building Information Modelling/Building Energy Modelling) is to get more, and better information faster directly from the process of creating architecture. This immediate performance feedback can streamline coordination, increase the parity between the design model and reality, and to optimize results.

Place, Race and Finance

Originally written as a letter to Barrie City Council, June 10, 2020 I am writing in the context of the increasing pressure for everyone, including place makers, to consider the deep social impacts of urban design and architecture on the well being of citizens. The recent #BlackLivesMatter protests demands across the board reforms that I … Continue Reading

down angle photography of red clouds and blue sky

Air is Life

While the current debate over the human diet seeks to settle the question of optimal health, both for the individual and for the planet (keto? veg? local?), few realize what a significant role the air we breathe has on our overall health. The fact that we can’t see, and can only vaguely smell the quality … Continue Reading

Thomson Architecture; A Family Legacy, sortof…

  Architecture is not an easy business. Just as with any career in a creative field, it’s not nearly enough to be talented. My grandfather, George James Valence (GJV) Thomson had an incredible eye, was a skilled craftsman, and had the education of an Architect from both Pratt Institute in NYC, class of 1933, and … Continue Reading

Robot Architect

If anyone had told me last year that starting in 2018 I would be using a robot to create measured plans of existing buildings, I would think that either a) they are whackos that over-estimate the capabilities of current technology or b) they must assume that I have unlimited funds to buy such equipment.  Neither … Continue Reading

Electric Motorcycles

Transportation architecture is a thing. Vehicle designer is a thing. Vehicle Architect? Nope. But here I will try. My hobbies have always involved going fast on/in a vehicle of some sort. In winter this has been snowboards, skis, even kayaks downhill! On water, windsurfing. On asphalt, bikes, skateboards and electric cars. And soon … eBikes. … Continue Reading

Building Permits, Why Bother?

Far from being a mere ‘cash-grab’ by municipalities, the application for and enforcement of the Building Code is considered the bare minimum requirement for a building to demonstrate that life safety requirements have been met.

From Pythagoras to Pizza

Who didn’t love making their first circle with a compass? Although a love of building blocks and form in general may appeal to any kindergartener, it was this subtle abstraction of  the ‘geometry’ – the graphic description of the rules of form that took hold of my imagination as a kid. I imagined that for … Continue Reading

Why a BCIN is not an Architect

So you are thinking of designing and building a home in the Province of Ontario? You have a number of options and factors to consider when engaging a Designer or Architect and Builder. I’ve been asked more than a few times to explain the difference between Architects, and the other kinds of  designers and design-builders out … Continue Reading

Residential Fees

When shopping around for professional services, it’s important to qualify your project requirements by answering a few key questions such as; What is the ‘going rate’ for an Architect? Aren’t Architects too expensive* to use for a simple house? Can’t I just hire a draftsperson to draw up my home? I’ve designed my home already, … Continue Reading

A Note on Passivhaus vs. R2000

I have lived and practiced green design in Germany, and I witnessed the introduction of the WSVO (Waermeshutzverordnung) firsthand in 1994. These were mandated changes to the levels of insulation required to be placed in the walls, roofs and floors of new buildings. At the time of my first R2000 build near Stuttgart (1996), I … Continue Reading

Structural Insulated Panel & Finish Systems – (SIPFS)

  • November 10, 2009
  • Research
  • 0 Comments
  • andyro

INNOVATION #1:. SIPFS: A Structural Insulated Panel and Finish System consolidating primary structure, thermal envelope and finishing system in a durable, modular system that assembles rapidly and easily on-site PROBLEM: Conventional construction is often per- formed on-site where builders are at the mercy of the elements as well as light conditions, dirt and debris and … Continue Reading

Farms, Fractals, and Sacred Geometry

1. The Measure of Heaven: Time, Space and Geometry as found in the texts of Enoch. April 19, 1999. UBC Comparative Religion.
2. Fractal Physiology: UBC Biomechanics, for Dr. David Jones.
3. The Farm in European Architectural History: UBC School of Architecture, for Dr. Sheri McKay